Airtec–Single Fore use with Thermal Blocks

Airtec-Single is to be used in conjunction with thermal blocks. Airtec-Single is rolled to 25mm x 38mm vertical counter battens, thus creating the required air gap.

Once Airtec-Single is in place and joints sealed using Airtec YBS 75mm tape, then plasterboard (internal finish) is applied directly onto the Airtec and fixed directly through to the battens.

Airtec–Double For use with Medium/Dense Blocks

Airtec-Double is to be used in conjunction with medium dense blocks.

Airtec-Double is fixed to the blockwork-mounted horizontal counter battens thus creating the required air gap.

Once Airtec-Double is in place and joints sealed with Airtec YBS 75mm tape, then the vertical counter battens are fixed at the required centres, ready for direct application of the plasterboard (internal surface).