Processed as per your typical construction detail i.e.
Liner Panels/Spacer System etc.
Lay Glass Fibre/Mineral
Wool over Liner Panels supported by self adhesive Stick Pins
Lay Foil-Clad FR directly over the top of the quilt and
Stick Pins, ensuring that the first roll lays over drip flashing
at bottom
Ensure that at every spacer system centre the top edge
of the Foil-Clad FR is fitted flush to the underside of the
spacer system and, at the bottom edge, overlaps the lower
spacer by 75mm minimum
Vertical laps must be no less than 50mm and taped with
YBS Foil-Clad Tape
Horizontal laps should be a minimum 75mm and NOT taped
Foil-Clad FR can easily be cut with a sharp knife.
Suits all Typical Construction
Methods
Major Cost Savings
Simple to Install
Minimises Cold Bridging
FIRE RETARDANT
UInsulates and Vents/Breathes
in One Application
Waterproof - Protects Quilt from
Rain During Construction
Independently Tested for
Breathability
Complies with the New Part L
Regulations and Part J Standards
CFC & HCFC FREE
Foil Clad FR is a derivative
of Breather foil FR which is fully certified.
