Products Overview | Cavity Closers | Therma-bridge Plus

• Therma-bridge Plus should be positioned at the cill/threshold reveal and held in place by the returned (closure blockwork).
  
• Alternatively, Therma-bridge Plus can be tacked onto the side of the window frame, if the window is to be built-in.
  
• Therma-bridge Plus should be positioned with the dpc facing outwards.

• 100mm of the insulation should be cut/ trowelled off the dpc prior to the commencement of the installation.
  
• The exposed dpc should be lapped onto the horizontal dpc, the insulation cut edge being butted as tight as possible onto the top edge of the horizontally applied Thermabridge Plus.
  
• Therma-bridge Plus should be built-in as the work progresses.
  
• Alternatively, Therma-bridge Plus can be tacked onto the side of the window frame, if the window is to be built-in.
  
• Therma-bridge Plus should be positioned with the dpc facing outwards.