Therma-bridge Plus should
be positioned at the
cill/threshold reveal and held in
place by the returned (closure
blockwork).
Alternatively, Therma-bridge
Plus can be tacked onto the
side of the window frame, if the
window is to be built-in.
Therma-bridge Plus should
be positioned with the dpc
facing outwards.
Vertical Istallation
100mm of the insulation should be
cut/ trowelled off the dpc prior to the commencement of the installation.
The exposed dpc should be lapped
onto the horizontal dpc, the
insulation cut edge being butted as
tight as possible onto the top edge
of the horizontally applied Thermabridge
Plus.
Therma-bridge Plus should be
built-in as the work progresses.
Alternatively, Therma-bridge Plus can be tacked onto the
side of the window
frame, if the window is
to be built-in.
Therma-bridge
Plus should be
positioned with the
dpc facing outwards.
