Underfloor Heating Pipe Clips

Underfloor Heating Pipe Clips from YBS Insulation

Underfloor Heating Pipe Clips

Underfloor heating pipe clips from YBS Insulation.

Here at YBS Insulation we manufacture super floor which is a high performing insulation for heating systems that are under the floor.

This can be used for suspended floor applications and can be used with the modern floor panellings or even with the older more traditional floorboards. Multiple layers oflaminated foil are put together and coated with special treatments to prevent the foil from becoming corrupted in any way, when applied it will help reflect heat back but also allow for excess heat to be displaced during hotter times of the year. It should also help to increase the u values in new or old properties.

For solid floor applications we provide you with underfloor heating clips and super floor board which is made up from many layers of laminated foil and can be made from different materials to suit different budgets including expanded polystyrene or polyurethane.

Superfloor is rolled out with the foil facing upwards, over the joists and requires underfloor heating pipe clips. The pipework is then clipped through into the insulation layer using the specially designed YBS Pipe Clips to maintain required air gap - 5 per M.

The horizontal joints are overlapped by 50mm and are left open to allow for any moisture accumulation to dissipate Superfloor must then be brought up (behind the skirting board) to 75mm.

The pipework is then laid starting from the manifold and then into the required room (see drawing). The pipe is then laid at uniform centres of approximately 200mm centres, notching where necessary. The decking is then fixed with screws (at 200mm centres) into battens/joists providing 25mm penetration into the 50mm wide battens/joists.